F-600 MYLAR INK This is an ink with excellent adhesion to mylar and most solder masked circuit boards, dries fast, and resists abrasion. It resists usual washes because it is not removed by water, naphthas, trichloroethylene liquid vapor or by Cholorethene. Can be used with ordinary rubber stamps and is supplied in the F-600 dye colors: BLACK, RED, BLUE; and in F-650 pigment colors WHITE, ORANGE, and YELLOW. Use our special F-600 Reactivator or F-600 Remover.
F-750 HIGH HEAT INK The F-750 high heat ink is made with a silicone resin, and the ink is pigmented with colors that withstand up to 800°F without change. F-750 colors: WHITE, BLUE, RED, and BLACK. Use metal stamp pads only.
F-800 VINYL INK The binder of this ink is a plasticized vinyl resin, and a portion of the solvent system is a powerful solvent for polyvinyl chloride. This gives an ink which has specific permanent adhesion to vinyls. Available in F-800 dye colors: BLACK, RED; and in F-850 pigment color: WHITE, and YELLOW. Use our special Reactivator or Remover. Use metal stamp pads only.
F-UV ULTRA VIOLET INK Visible ink under black light. This ultra violet ink is designed for stamping on non-porous surfaces. For retail, to mark appliances. For electronics, to find out where parts are going without being detected. For secret markings and identification. To mark assembly line parts, such as cans and bottles to identify which line or operator processed the parts. Use metal stamp pads only.
F-1400 ALCOHOL RESISTANT INK It was developed for marking circuit boards. We believe that this Alcohol Resistant Ink, will replace the epoxy ink which is more difficult to use. Many industries use alcohol as a cleaning solvent. This ink has very good adhesion to most non-porous surfaces. It should be used with Rubber Stamp and metal cased Linen stamp pad only. F-1400 dye color BLACK, RED, and BLUE- and in F-1450 Pigment Color: WHITE. Use our special F-1400 Reactivator, or F-1400 Remover.
PASTE INKS: "GLASSTICK" All purpose electronics ink for glass, metal some plastics, etc. Fungus proof, Salt Spray resistant MIL-E-5272C. Resistant to alcohol, gasoline, water and some solvents. Air dry (2 hrs.), hot blast or bake 180°F. 20 minutes. #45QD Black or #46QD White. Check our Paste Ink Cleaner, mild fumes and safer (flash point over 100°F) and Rubber Hand Roller-4" for spreading out paste ink.
F-1500 WATER OFF INK An ink for temporary marking which has good adhesion to most surfaces and good resistance to abrasion, permitting handling of marked pieces. The binder is completely water soluble and markings can be washed off with tap water. F-1500 dye colors: BLACK and RED. F-1550 pigment colors: WHITE, YELLOW and ORANGE.
F-2150 ROLLER STENCIL INK These inks are applied by stencil roller and pad. Stencil inks are permanent and dry in seconds on any porous or non-porous surface. Non-fading, non-etching, non-corrosive. Resistant to weather, gasoline, naphtha, oils, and abrasion. Excellent adhesion under all conditions. F-2150 pigment colors: BLACK, SILVER WHITE, YELLOW, RED, BLUE, and ORANGE. F-2150 Remover and Reactivator is available to extend ink mileage. Use OPCO 2110 Stencil Roller with MF3 Stencil Roller Pad.
RETURN to OPCO home page for more information
SEND for complete Catalog or Samples
Organic Products Company - P.O. Box 170428, Irving, TX 75017 - (972) 438-7321